355nm UV laser-10w
Incazelo yomkhiqizo
Izici ze-laser ye-UV engu-355nm ezinomgodi ovalekile omangelengele, usayizi ohlangene ngokwedlulele, ulula futhi uqinile, ukuzinza okuphezulu, ukusebenza kahle okuphezulu, ukwethembeka okuphezulu kanye nekhwalithi enhle kakhulu ye-laser beam. Umklamo wayo ohlangene uphakamisa ukuthi asikho isidingo sokwakha umzila omkhulu wokukhanya, onciphisa kakhulu isikhala nezindleko futhi kwenza kube lula ukufakwa emishinini yokumaka ye-UV laser.Ukwengeza, isakhiwo somgodi sinozinzo kanye nokukaleka okuhle kakhulu, okusho ukuthi indawo efanayo ye-laser ingaba ikhiqiza ama-lasers anamandla amaningi , futhi ukuzinza kwezigaba zamandla ahlukene kuthuthukiswa kakhulu.
Izici ze-laser
1. 355 nm ubude begagasi, Kufika ku-200 Hz izinga lokuphindaphinda;amandla laser asukela 3w-10w;Ukulungiswa okuqhubekayo kwezinga lokuphindaphinda kuyilapho kugcinwa amandla okushaya kwenhliziyo angashintshi, ukukhomba kwe-boam ephakeme nokuzinza kwamandla kwenza ukukhetha kokuqala kwe-micromachining, ukumaka kanye nezicelo zokususwa kwefilimu encane;
2. Ikhwalithi ye-beam eyingqayizivele (M²<1.2) ，iqinisekiswe ngokuphelele kuwo wonke amanani okuphindaphinda;ububanzi be-pulse bufushane kuqhathaniswa <12ns@30 ngokudluliswa okuncane kokushisa ezintweni ezizungezile;ikhwalithi ephelele yendawo ye-beam(I-Beam Circularity>90%)
Eduze kwephrofayela ye-Gaussian yebhimu ebushelelezi enenani eliphansi elingu-M² < 1.2 nokugxila okuhle kunenzuzo ezinhlelweni ezifana ;
3. Ubuchwepheshe bokushintsha i-Q obuyingqayizivele, buvumelanisa nezimfuneko zokulawula ezihlukahlukene zezinhlelo zokusebenza ze-laser;Ukuvuselela ku-inthanethi kobuchwepheshe bokuhlanganisa i-harmonic;Ukuqina kwamandla esikhathi eside okuhle kakhulu Umgodi ovalekile omangelengele, Usayizi ohlangene kakhulu, Ulula futhi uqinile;
4. Ubuchwepheshe bokulawula idijithali kumshayeli, isikhombimsebenzisi sokulawula i-RS232 siqinisekisa ukulawula okulula nokuhlanganiswa nemishini yokumaka laser;
5. Le laser ithatha idizayini yesitayela esisodwa enesakhiwo esihlangene nesinengqondo, ukufakwa kalula.
Kulula ukuthutha futhi yonga isikhala ngenxa yedizayini ehlangene nelula.
Ukupholisa amanzi, ubuchwepheshe obungabiza kakhulu futhi obuthembekile bokumpompa kanye nomklamo we-DPSS ongenazikhulisi kuqinisekisa ukusebenza okulula nokuqondanisa ukufakwa okulula nezindleko zokulungisa eziphansi .
Usayizi wesakhiwo
Umshini opholile wonke-in-one opholiswe ngamanzi (Inguqulo yokuvikela umswakama)
Umshini wokupholisa umoya
Isibonisi esiyidijithali esigcwele, esisekela ukuxhumana nekhompuyutha, esikwazi ukulawula okukude kwe-laser
| Imodeli No. | I-GT-R355-10W | ||||||
| 3W | 5W | 8W | 10W | imiyalelo | |||
| Laser wavelength,nm | 354.7 | 354.7 | 354.7 | 354.7 | 3-5w | 8-10w | |
| Amandla Okukhipha Aphakathi, W | >3 | >5 | >8 | >10 | @30kHz | @40kHz | |
| Ububanzi be-Pulse, ns | <15 | <15 | <15 | <15 | @30kHz | @40kHz | |
| Isilinganiso sokuphindaphinda kwe-Pulse, kHz | 20-200 | 20-200 | 20-200 | 20-200 |
| ||
| Imodi Yendawo | I-TEMoo | I-TEMoo | I-TEMoo | I-TEMoo |
| ||
| (M2) | <1.2 | <1.2 | <1.2 | <1.2 |
| ||
| Ububanzi be-Beam, mm | 0.8±0.1 | 0.8±0.1 | 0.8±0.1 | 0.8±0.1 | Kukalwa efasiteleni | ||
| I-Beam Full Divergence Angle, mrad | <1.5 | <1.5 | <1.5 | <1.5 |
| ||
| I-Beam Circularity,% | > 90 | > 90 | > 90 | > 90 |
| ||
| Ukuzinza kwePulse-to-Pulse,% | <2 | <2 | <2 | <2 | I-RMS/@30kHz | I-RMS/@40kHz | |
| Ukuzinza kwamandla okumaphakathi,% | <5 | <5 | <5 | <5 | I-RMS/8 amahora | ||
| I-Beam-Pointing Drift,μrad/℃ | <25 | <25 | <25 | <25 |
| ||
| I-Polarization Ratio | >100:1 | >100:1 | >100:1 | >100:1 |
| ||
| I-Polarization Orientation | Evundlile | Evundlile | Evundlile | Evundlile |
| ||
| ITemp Esebenzayo.& RH | 10 kuya ku-30 ℃ | 10 kuya ku-30 ℃ | 10 kuya ku-30 ℃ | 10 kuya ku-30 ℃ |
| ||
| <80% | <80% | <80% | <80% | ||||
| Isikhathi Sokugcina.& RH | -20 kuya ku-65 ℃ | -20 kuya ku-65 ℃ | -20 kuya ku-65 ℃ | -20 kuya ku-65 ℃ |
| ||
| <90% | <90% | <90% | <90% | ||||
| Isidingo sikagesi | 100-240 VAC | 100-240 VAC | 100-240 VAC | 100-240 VAC | Isigaba esisodwa | ||
| 50/60Hz | 50/60Hz | 50/60Hz | 50/60Hz | ||||
| Ukusetshenziswa kwamandla | <500W | <500W | <500W | <800W |
| ||
2. Ikhombisa izinga lokushisa lendawo. | |||||||
